Yealink SIP-T5 Series Phone Provisioning

1. Using a web browser on the same LAN (Local Area Network) as the Yealink T5 series phone, enter the IP address of the phone you wish to configure in the web browser address bar.

If you do not know the phone IP address, from the home screen press Menu > Status and record the IP address listed at IPv4

2. Login using the default Administrator login and password. The default user is admin, and the password is admin.

3. From the left menu, select Settings

4. On the left side menu, select Auto Provision

5. In the line that has Server URL, please type http://provisionmyphone.net/cfg

6. No other settings are required to be changed if the phone is set at factory defaults. Select the Confirm button at the bottom of the page.

7. Scroll to the bottom of the page and select the "Auto Provision" button. The phone will now reboot and apply the configuration file on the AVATAVA Endpoints Server.

  • Yealink, phones, VOIP
  • 4 Korisnici koji smatraju članak korisnim
Je li Vam ovaj odgovor pomogao?

Vezani članci

Polycom VVX Series Provisioning

1. Using a web browser on the same LAN (Local Area Network) as the VVX series phone, enter the IP...

Yealink SIP-T2, SIP-T3, SIP-T4 Series Phone Provisioning

1. Using a web browser on the same LAN (Local Area Network) as the Yealink T series phone, enter...

Factory Reset Yealink Phones

Power on the phone Wait until the phone has booted up and is at the idle screen Hold down the...

Reset and Setup Polycom Soundpoint Phones

Reset IP 301, 501, 550, 600, 601, and 650 Power down phone Hold down 4,6,8,* while booting....

Avaya J100 Provisioning

AVATAVA support the Avaya J100 Series phones including the Avaya J129, J139, J159, J169, and J179...