Reset and Setup Polycom Soundpoint Phones

Reset IP 301, 501, 550, 600, 601, and 650

  1. Power down phone
  2. Hold down 4,6,8,* while booting. 
  3. When prompted, enter password (default is 456).
  4. Phone should reset to default and reboot.
  5. After reboot, press Menu-> 3. Settings->2.Advanced
  6. Enter default password (456), 1. Admin Settings ->SIP Server configuration
  7. Server 1 = 

 

Reset IP 320, 321, 330. 331, 335, 430, and 450


Cancel the Boot Process and then press the 1,3,5 and 7 keys together the phone should prompt you the following: Enter Password to Reset Settings: 

 

  • Poly, phones, VOIP
  • 3 Users Found This Useful
Was this answer helpful?

Related Articles

Polycom VVX Series Provisioning

1. Using a web browser on the same LAN (Local Area Network) as the VVX series phone, enter the IP...

Yealink SIP-T2, SIP-T3, SIP-T4 Series Phone Provisioning

1. Using a web browser on the same LAN (Local Area Network) as the Yealink T series phone, enter...

Yealink SIP-T5 Series Phone Provisioning

1. Using a web browser on the same LAN (Local Area Network) as the Yealink T5 series phone, enter...

Factory Reset Yealink Phones

Power on the phone Wait until the phone has booted up and is at the idle screen Hold down the...

Avaya J100 Provisioning

AVATAVA support the Avaya J100 Series phones including the Avaya J129, J139, J159, J169, and J179...